Local network settings of the RCA are configured and network parameters are
changed on this screen page.
Enter the IP address (Internet address) in the four fields provided.
If the IP address is changed, the net mask – which is also configured on this
screen page – changes too (also refer to the description of the Net Mask option).
Pay attention to the following advice when allocating IP addresses:
An IP address must not be allocated more than once. If this happens,
there can be considerable problems with terminal operations. These
problems may not become apparent immediately. These problems may
also arise even if the devices to which the same IP address has been
allocated are not turned on at the same time.