Table of Contents
Advertisement
Configuration
Input is required for registration, which will be prompted at this point (you
must fill in these fields including Phone/Fax).
Ê Enter the ident number of the computer. If technically feasible this will be
already displayed. This number is unique and identifies you for all subse-
quent Teleservice activities. The ident number can be found on the
nameplate on your system unit.
Ê Company (abbrev.): Enter a short name for the company and, if there is
sufficient space, the location where you are based.
Ê The Automatic Defect Reporting (ADR) (no) and Administrator's mail
address (blank) are preassigned default values for the TeleCall function.
You will find further information on the topic of TeleCall on the Internet
under http://its.siemens.de/lobs/its/its_sc/swserv/reliant/tele-
call/telecall_gr.htm or by calling your Service hotline (0180/5-2202 in
Germany) and quoting the keyword TeleCall.
Ê Contact person: Here you enter the name(s) of one or more of your
employees who can be contacted about the system if a connection can-
not be established some time. Their phone and fax numbers are also
helpful.
Ê Additional information (see example) can be entered under Remark.
Once you have filled in the form, save the settings with the SAVE option.
Window 2 appears "Install Teleservice channel". Choose "f" for registration
and confirm the initial registration for Index 0.
U41224-J-Z916-1-76
Teleservice
61
Advertisement
Table of Contents
