Table of Contents
Advertisement
Configuration
6.2.2
New ports for the RCA
Configuration entry
for <port number RCA>
Configuration entry
correct ?
showlancon
Another
configuration entry?
no
Remote setup
Password
for <port number RCA>
(section 8.1.4 ports)
Another
<port number RCA> ?
no
Save setup
data
(section 8.1.12 end)
Figure 21: New ports for the RCA
Further configuration entries for an existing LAN Console are created by means
of the /opt/SMAW/SMAWxsco/sbin/mklancon script - as shown in figure "Configur-
ing the LAN Console and the RCA" on page 41 and "Commands" on page 43.
A password has to be assigned in mklancon to the specified port for each new
entry. This password has to be notified to the RCA by entering it under the
U41224-J-Z916-1-76
Configuring the LAN Console and RCA
New ports on the LAN console
mklancon
no
Delete
configuration entry
yes
yes
rsh ... setup
yes
rmlancon
RCA
51
Advertisement
Table of Contents
