Operating The Lan Console; Switching On/Off The Lan Console; System Unit Is Switched Off; System Unit Is Ready To Operate - Fujitsu LAN Console Installation, Configuration And Operation

LAN Console
4.4

Operating the LAN Console

4.4.1

Switching on/off the LAN Console

The LAN Console also has a main switch on the rear of the system unit in addi-
tion to the ON/OFF button on the front.
Figure 11: Switching on/off the LAN Console
1=Main switch
2=ON/OFF button
3=Power LED
4.4.1.1

System unit is switched off

The main switch (1) is in position O, the power LED (3) is not lighting and the
ON/OFF button (2) is not functional.
4.4.1.2

System unit is ready to operate

The main switch (1) is in position I and the power LED (3) is lighting orange. You
can enable the system unit in this mode with the ON/OFF button (2). The "ready
to operate" state corresponds to the "stand-by" status on a television. The
power LED (3) is described in greater detail in the next section.
U41224-J-Z916-1-76
Operating the LAN Console
O= System unit is disabled
I= System unit is ready to operate
21