Operation; Xscon Call - Fujitsu LAN Console Installation, Configuration And Operation

7

Operation

The LAN Console can represent up to 64 consoles on RM or PRIMEPOWER
(MR) servers. All commands are available on each LAN Console, including the
following console diagnostic tools: IKDB (Internal Kernel Debugger), BDM
(Board Debug Monitor) and OBP Monitor. RM or PRIMEPOWER (MR) servers
can also be rebooted from the LAN Console.
7.1

xscon call

Access to the RM and PRIMEPOWER (MR) servers is provided by xscon
(SMAWxsco package) and the necessary connection is selected and established
internally via rtty (SMAWrtty package). To establish this connection, both xscon
and rtty require data, which is defined when the LAN Console is configured.
U41224-J-Z916-1-76
79