>': password check - password rejected, access
ConsoleName>': password check - no response from host
If connection establishment fails because of a timeout and the timeout interval
of the application that is called by xscon is less than the timeout intervals in the
LAN Console or RCA, then no log entry is written.
Disrupted RCA - LAN Console connection
LAN connection disrupted
It can happen that the connection between the RCA and the LAN Console is not
terminated properly. This results in an open, hanging connection on the RCA
The reason for this could be that the connector on the LAN Console has been
detached, or that the connection from the RCA to the LAN has not been working
for some time.
Reset using a command
Hanging or open socket connections can be closed using a command. The user
root enters the following command on the LAN Console that set up the connec-
rsh <RCA SystemName> resetport <RCA PortNumber>
This command can also be input on a different LAN Console or system by the
user root, provided it is entered in the RCA setup. Select the menu item New in
order to enter the system on the screen "Hosts/DNS" on page 99.
Restore via the RCA setup routine
This problem can also be resolved by selecting the menu item Ports in the RCA
Select the relevant port (COM1=TCP port 3001, COM2=TCP port 3002,
...COM6=TCP port 3006) and click the Reset TCP Connection to this Port button.
The open or hanging socket connection is then reset to the port in question and
can be reopened.