Fujitsu LAN Console Installation, Configuration And Operation page 80

Remote boot und installation
5. Mount the Reliant UNIX CD-ROM, check it and copy it to disk. If the /var/sadm
file system does not have enough space for the copy, this is detected and
reported.
There are the following possibilities at this point:
– /var/sadm/remote or /var/sadm/remote/<VERSION> is a symbolic link to
another file system, which does have enough space.
– A separate file system with enough space has been mounted under
/var/sadm/remote.
6. Write entry in /etc/dfs/dfstab and NFS sharetab for the installation directory
(/var/sadm/remote or the directory to which the symbolic link points).
7. Copy the boot files to /tftpboot or /tftpboot/<VERSION>. If the /tftpboot does
not have enough space for the copy, this is detected and reported.
There are the following possibilities at this point:
– An attempt is made with nfs to mount /var/sadm/remote/cdrom/BOOT or
/var/sadm/remote/<VERSION>/cdrom/BOOT under /tftpboot or
/tftpboot/VERSION. Copying of the data is then inapplicable.
– If the first point does not work, you have to manually mount a separate
file system with enough space under /tftpboot.
74
Configuration
U41224-J-Z916-1-76