Configuring the LAN Console and RCA
The mkrca command is used to define that screen texts are to be output
in English for the RCA setup program. If German is required, this can be
done via remote setup – on the first screen page after access control
(see the section "Language/Keyboard" on page 91).
The RCA configuration parameters can be extended and changed con-
veniently with a remote setup using the X user interface (see "Appendix"
on page 89).
The setup data that is stored on the boot server is still available when the RCA
has been booted, i.e. if the RCA were to be rebooted without the setup data
being stored, the data would be loaded again.