Download  Print this page

Switching On The Rca - Fujitsu LAN Console Installation, Configuration And Operation

Hide thumbs


Switching on the RCA

Switching on the RCA
Ê You switch on the RCA with the main switch on the rear of the device. The
RCA powers on in the mode that was last active when it was switched off
with the main switch.
Ê When the power indicator is lighting orange, press the ON/OFF button on
the front of the RCA. When the power indicator is lighting green, the RCA is
Figure 19: Front view of the RCA
1 Power LED
– lights green when the RCA is switched on.
– lights orange when the RCA is ready. In this mode the RCA uses very
little energy and can be switched on using the ON/OFF button.
– does not light if the RCA has been switched off using the main switch
at the rear.
2 Mail LED
Not supported
3 Disk LED
lights when the flash card on the RCA is accessed.
Installing the RCA