Table of Contents
Advertisement
Teleservice
Parameters are entered in this window, which can be used to contact one of
the Siemens IT Service TELESERVICE centers in Frankfurt, Munich or Pad-
erborn. Normally you will choose the center that is closest to you. There may
be exceptions if projects are supported by a specific TELESERVICE center.
Ê Enter far under Telephone number if the Teleservice center does not lie in
your local telephone network. The parameter near may apply for you if you
are in the Frankfurt, Munich or Paderborn local public network. This field is
only shown in advance if pabx was entered for "Connection between modem
and telephone network".
Ê A further parameter required is the phone number for contacting the relevant
Teleservice center. A symbolic name can be used here or you can also enter
the number directly. A symbolic name is converted by the software. If the
number changes, the assignment can be changed by the center. The follow-
ing symbolic names and numbers apply presently for the Teleservice cen-
ters:
Frankfurt
Munich
Paderborn
The operating mode of the modem is read from the modem parameters and
normally does not need to be changed.
Ê Save the settings with SAVE.
62
0+D-6
06966824742
0+D-2
08936012906
0+D-5
05251829890
Configuration
U41224-J-Z916-1-76
Advertisement
Table of Contents
