Download  Print this page

Fujitsu LAN Console Installation, Configuration And Operation page 66

Hide thumbs

Advertisement

Teleservice
Ê Set the channel speed to 38400.
Ê There are two options for connecting the modem to the telephone network.
Enter pabx if the modem is operated via a PABX. Enter pstn if the modem is
connected directly to the public telephone network.
Ê For the dialing method, you can enter td if the modem is going to operate with
tone dialing or pd for pulse dialing.
Ê The Guard tone and Idle state modem mode items are taken from the parameter
descriptions for your modem and normally do not need to be changed.
Ê Exit the menu by choosing SAVE.
The screen is then refreshed and the following messages are displayed
(example):
 Modem installation is running, please wait .................
 Approved firmware revision:
 Actual firmware revision: xxxxxxxxxxxxxxxxxxxxxx..
 ..................................................
 Done
 Press ENTER to continue
Ê Confirm this prompt with the <ENTER> key.
This completes installation of your modem. Now you can continue with
administration of the TELESERVICE channel.
Ê In window 2, first choose option b "Parameter for registration (OLR) and
autom. defect reporting (ADR)".
60
xxxxxxxxxxxxxxxxxxx
Configuration
U41224-J-Z916-1-76

Advertisement

loading