You can start WebSysAdmin either at the shell or desktop level:
– Starting at shell level
Start the user interface in write mode by entering the following at command
# /opt/SMAW/bin/wsa node name
The welcome screen then appears and you proceed as described (language
setting, root password).
If you only want to invoke the user interface in read mode, enter the follow-
# /opt/SMAW/bin/wsa -read only node name
A dialog box then appears and you proceed as described (user name, user
password, language setting etc.).
– Starting at desktop level
You will find the WSA application on the desktop in the Workspace Menu under
Applications -> Application Manager -> System_Admin -> WebSysAdmin.