This section gives advice on safety that you have to heed when using your LAN
Console or RCA.
This device complies with the relevant safety regulations for information technol-
ogy equipment including electrical machines for use in office environments.
Please contact your local sales office or our Service organization if you are in
doubt about whether the device can be installed in the environment you envis-
age. Also note the safety notes for RM and PRIMEPOWER (MR) and rack sys-
Radio Frequency Interference Statement
(see also the statements given in section "Standards" on page 14 and
The following notice is for EU users only:
This is a product which meets class B of EN55022.
The following notice is for USA users only:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
Only transport the device in its original packaging or in other suitable
packaging, which will protect it against impact and jolts.
Condensation may occur when the device is brought in from the cold
to its site of installation. Wait until the device has reached a stable
temperature and is absolutely dry before putting it into operation.
Heed the ambient conditions given in the "Technical specifications"
on page 35 before installing the device and putting it into operation.
This device features a safety-tested power cable and may only be
connected to a grounded socket.
Make sure that the socket on the device or the mains socket on the
housing installation are readily accessible.