Pre-Installation; Hard Disk Partitioning - Fujitsu LAN Console Installation, Configuration And Operation

LAN Console
4.4.3

Pre-installation

The LAN Console is preinstalled as follows:
Component
Operating system
Teleservice
Language
Table 7: Pre-installation of the LAN Console
4.4.4

Hard disk partitioning

The following hard disk partitioning is predefined:
Partition Directory
0 /(root)
1 swap
2 overlap
3
4
Table 8: Hard disk arrangement
This hard disk arrangement allows use both as a LAN Console and as an SMC
on PRIMEPOWER Enterprise Servers.
I
For a reinstallation, do not use the disk arrangement from the Solaris
manual; use the arrangement proposed here instead. This will save you
repartitioning when using the LAN Console as an SMC.
U41224-J-Z916-1-76
Operating the LAN Console
Pre-installation
Solaris 8 (Entire distribution plus OEM Sup-
port 64 bit) incl. Disksuite, SUNVTS™
V4.0
German (English is automatically installed
as well)
Hard disk partitioning 20 GByte
overlap - (swap+partition 3 + partition 4)
ï overlap - (swap + 20 MByte)
512 MByte
Entire disk
10 MByte
10 MByte
23