The RCA properties can be configured in the setup routine:
– Access Control
The following sections present the screen pages in sequence together with the
properties, options and some explanations.
If no input or mouse click takes place for 5 minutes during setup, the setup rou-
tine terminates without saving any settings.
The RCA setup routine is called as follows on the LAN Console:
rsh <RCA SystemName> setup -display <SystemName LAN Console>:0
For this remote RCA call, make sure that the RCA has access to the LAN
Console's X server. This access permission is allocated with the
xhost +<RCA SystemName>
command. The xhost command has to be repeated whenever the user
This xhost command is also executed in the mkrca script (see "Configuring the
RCA" on page 45), because remote call of RCA setup is needed to finish con-
figuring the RCA by saving the setup data.
– Firmware Update
– System Information