Connecting the cables
The RCA has an Ethernet interface and six serial ports.
Simultaneous access to different host computers is enabled by the integrated
The connection complies with IEEE 802.3.
Connection: 10BaseT (twisted pair) / RJ45 connector
Transmission rate: 10 Mbit/s and 100 Mbit/s
Serial interface for connecting the console
COM 1-2 port: 9-pin module connector, D-SUB, male connector
COM 3-6 port: 8-pin RJ 45 connector
Note that the different ports also require different cable types (see the "Cable
types" on page 34).
Transmission rate: 1.2 to 115.2 Kbit/s
Table 9: Communication
Installing the RCA