Activating Online Mode - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

11.15 Activating online mode

11.15 Activating online mode

The online mode can only be activated for variant NET and VA locking devices (see
of OMEGA FLEX locking devices"
Required master media:
RF-Ini-Master
l
For the activation of online mode it is not necessary to authorise the RF-Ini-Master in
advance.
Procedure:
1. Hold the RF-Ini-Master for ca 1 second in the reading field of the locking device.
Following signals appear:
A: 1x short green
= successfully connected to the Access-Point
B: 1x long red
= no connection to the Access-Point possible
C: 1x long green
= Connection to the Access-Point existed already
2. Remove the RF-Ini-Master from the reading field.
The online mode is now deactivated.
Page 128 of 141
on page 9).
"Variants
Long shield ILS