CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 112

11.2 Authorising additional master media
2. Now you can authorise any number of master media one after the other by holding each
master media for ca 1 second in the reading field of the locking device.
The following signal appears for each master media:
1x short green
3. Hold the System-Master for ca 1 second in the reading field of the locking device to end the
"authorise mode.
The following signal appears:
1x long green
The "authorise mode" will end automatically after 5 seconds. Die new authorisations
remain stored.
All master media, which were held before reading field, are now authorised to make settings for
this locking device.
Troubleshooting:
Signalling
During step 2:
The master media could be read but
could not be authorised:
a) You have tried to authorise a
Program-Master for a V-NET locking
device.
b) The master media has the wrong
system identity code
c) You have used a locking media
instead of a master-media.
d) you have tried to authorise an RF-
Trace-Master or an RF-Ini-Master.
Page 112 of 141
Reason
a) Program-Master cannot be authorised
for V-NET devices.
b) Use a master media with the correct
system identification code.
c) Use a master media.
d) RF-Trace-Master and RF-Ini-Master
cannot be authorised.
Solution
Long shield ILS