CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 97

7.5.4 Signalling after battery insertion
Signalling
Long shield ILS
8. Guide the
and push it up to the end of the inside lever handle.
9. Pull the
FIXTURE RING
spanner.
Do not over-tighten the fixture ring with too much
force! Otherwise you may damage the handle set.
The battery replacement is completed successfully.
Meaning
Start sequence for offline locking devices: No error
Start sequence for online locking devices: Device is online and is connected to the
Access-Point
Start sequence for online locking devices: Device is online but no connection to
Access-Point is possible
Firmware error. Execute a firmware update. If the problem persists, contact your
CES partner.
In case a system error exists, it will be displayed immediately after the
start sequence, see "System error"
7.5 Battery management
over the inside
FIXTURE RING
hand tight
WITH THE
on page 107.
INSIDE LEVER HANDLE
CES ring
Page 97 of 141