4.6 Assembly Option S (for Short shield holes)
4.6 Assembly Option S (for Short shield holes)
The Long shield ILS - Option S is suitable for utilising the existing short shield holes for assembly.
4.6.1 Scope of delivery - Long shield ILS Option S
1
1 Outside fitting, pre-assembled with outside lever handle, coupling module and e-module
2
1 Assembly plate, pre-assembled with inside lever handle
3
1 Inside shield
4
1 Fixture ring
5
1 Square spindle
6
3 Washers (for fixing screws)
7
3 Locking nuts (for fixing screws)
8
2 Fixing screws without cable slit (with fixing rings)
9
1 Fixing screw with cable slit (with fixing ring)
10
2 Batteries Energizer Ultimate Lithium 1,5V AA
11
1 Battery module
12
1 Support frame
13
1 Spring clip (only for handle sets without a PZ hole)
14
1 Installation tube
Page 34 of 141
Long shield ILS