Use Of The Omega Client Software - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

5.7 Use of the OMEGA Client software

OMEGA Suite
The OMEGA Suite is a collection of software modules for the administration and maintenance of
your OMEGA FLEX system. Besides the OMEGA Client, the OMEGA Suite includes further tools e.g.
for Firmware-Updates, Server configuration etc.
OMEGA Client
The OMEGA Client is the software with which you can administer your entire OMEGA FLEX
system.
Each setting in the OMEGA Client (e.g. changes in the locking authorisations, adding time profiles
etc.) creates a programming job. Programming jobs must either be transmitted to the locking
device or to the locking media (V-NET only). Once the programming jobs have been transmitted,
the settings are stored.
The display in OMEGA Client "Programming required", tells you that programming jobs are
pending.
The OMEGA Client is required for all types of administration except for administration
with master media.
5.7.1 Client-Server-Principle
In order to be able to use OMEGA Client, you require an OMEGA Server to store the data. The
OMEGA Client allows you to access these data and set up all functions of your OMEGA FLEX
system.
The OMEGA Server can be installed locally (on the same PC on which the OMEGA Client is also
installed) as well as on an external server.
For administration with an RF-Stick, it is sufficient to install the server locally, provided you are the
only user of the OMEGA Client. If multiple OMEGA Clients have to have access to the server, you
require an external server which can be accessed permanently.
5.7.2 OMEGA Client functions
Administrative jobs can be handled more conveniently with OMEGA Client software than by pure
master media based administration.:
Authorising multiple locking media at a time and deleting individual locking media
l
without the locking media being in your possession.
Long shield ILS
5.7 Use of the OMEGA Client software
Page 81 of 141