Assembly; Important Notes On Assembly; Preparations For Assembly - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

4.1 Important notes on assembly

4 Assembly

4.1 Important notes on assembly

CAUTION
Damage to the handle set is possible if not assembled properly.
NOTICE
The handle set can be damaged if not assembled properly.
- The handle set may only be assembled by competent persons. These
persons must have been trained on the product by CES or a CES partner.
NOTICE Lock out possible.
The door can slam shut during assembly and you can no longer open the
door.
- Secure the door against slamming shut during assembly.
- Ensure that you have an authorised locking media.

4.2 Preparations for assembly

4.2.1 Check the scope of delivery
1. Remove the fitting from the packaging and remove all packaging materials such as films,
filler material and the packing box.
2. Check the scope of delivery ; see the relevant chapter on the respective handle sets and ver-
sions.
3. Check the new equipment for transport damages and report these to your CES partner
immediately.
Page 16 of 141
Risk of injury while working on the punched metal parts.
The electronic handle sets contain punched metal parts, which can have
sharp edges.
- Wear work gloves during the assembly work.
Long shield ILS