4.6 Assembly Option S (for Short shield holes)
Page 42 of 141
9. Tighten the
with the wrench (max. 1.2 Nm).
NUTS
While tightening the
the cables upwards, so that these are not jammed!
10. Tighten the grub screw of the
again.
11. Guide the
SUPPORT FRAME
to the
. Thereby guiding the cables
MOUNTING PLATE
through the recess in the support frame.
FIXING SCREW WITH CABLE SLIT
de lever hand
INSI
LE
over the
INSIDE LEVER HANDLE
Long shield ILS
hold
up