Administration; Omega Flex System Administration Basics - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

5 Administration

NOTICE Inadvertent state of your system possible
If you are not fully aware of the capabilities of your system, it may execute
unexpected functions.
- If you are administrating a OMEGA FLEX system, you must be well aware
of the consequences of programming and settings. Otherwise,
unexpected results are possible.
- Always confirm that your programming will achieve the desired results.
5.1 OMEGA FLEX system administration basics
5.1.1 System families
The family of systems is the top most differentiating level for the OMEGA FLEX systems. It
specifies which transponder technology (LEGIC or MIFARE) is used in the system:
OMEGA FLEX MIFARE
l
OMEGA FLEX LEGIC
l
5.1.2 Operating modes: LINE vs V-NET (only MIFARE)
The operating mode specifies, where the locking media authorisations are stored. There are two
operating modes for the OMEGA FLEX MIFARE systems:
LINE: Authorisations are stored in the locking device
l
V-NET: Authorisations are stored in the locking media
l
5.1.3 Types of administrations (only MIFARE)
Within the two operating modes LINE and V-NET different administration types are possible:
Long shield ILS
5.1 OMEGA FLEX system administration basics
Page 61 of 141