CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 52

4.7 Assembling wide shield (for rosette-holes)
Page 52 of 141
7. Screw the assembly plate of the outside shield again
to the outside fitting.
Make sure thereby that the cables are not pinched
or jammed.
8. Insert the
SQUARE SPINDLE
Make sure that the elongated hole is level.
Make sure that the ball of the square spindle in the
drill hole latched in the coupling follower.
9. Feed both cables into the
in the coup .
LING FOLLOWER
tube.
INSTALLATION
Long shield ILS