CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 88

6.2 Using the Office function
Problem/Signalling
6.2.2 Deactivating the office mode
Required devices and locking media:
Locking media, which is authorised for the office function
l
Locking device, which is authorised for the office function
l
Procedure:
1. Hold the locking media authorised for the office function for ca 2 seconds in the reading
field of the locking device.
As soon as the locking media is in the reading field, the following signal appears:
1x long green
After ca 2 second, another signal appears:
1x long green , 1x short green
The office mode is now deactivated. The door can be opened now only with authorised locking
media.
Troubleshooting:
Signalling
After 2 seconds The office mode cannot be deactivated
because the locking media is not
authorised for the office function.
not shown.
Page 88 of 141
Reason
The locking media is not authorised
for the office function.
Reason
Solution
be activated.
Have the locking media
authorised for the office function
by the system administrator.
Solution
Have your locking media authorised for
the office function by the system
administrator.
Long shield ILS