CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 28

4.5 Assembling basic version (for Long shield holes)
Page 28 of 141
b) In case no Euro profile cylinder is assembled, then the
spring clip will be assembled. Put the
and on the lower
NUTS FIXING SCREWS
6. Tighten by hand.
NUTS
While tightening the
the cables upwards, so that these are not jammed!
7. Undo the grubs
CREW FROM THE
ly, to remove any possible stress from the
SLIGHT
square spindle.
,
SPRING CLIPS WASHERS
.
FIXING SCREW WITH CABLE SLIT
inside lever h
ANDLE
Long shield ILS
hold