Online Mode - CEStronics CES OMEGA FLEX Assembly And Operating Manual

Long shield ils-i
Hide thumbs Also See for CES OMEGA FLEX:
Table of Contents

Advertisement

11.9   Online mode

11.9 Online mode

11.9.1 Activating online mode
Online mode can only be activated for NET and VA variant locking devices.
Required:
RF-Ini-Master (does not require prior authorisation to activate online mode)
l
Procedure:
Steps
1. Hold the RF-Ini-Master in the reading field of the locking device for 1 second.
One of the following signals appears:
A: 1x
short green
B: 1x
long red
C: 1x
long green
Online mode is now active, regardless of whether a connection to an Access-Point could be established. As soon as an Access-
Point is found, the locking device automatically connects to it.
Troubleshooting:
Signal
While the RF-Ini-Master is held in the reading field:
1x
long red
Page 74 of 83
Connection to Access-Point successful
Cannot connect to Access-Point
Connection to Access-Point already exists
Cause
The locking device is not a NET or VA
variant.
Solution
Online mode is not available for these locking
devices.
Wide shield replacement handle set ILS-I

Advertisement

Table of Contents
loading

Table of Contents