CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 40

4.6 Assembly Option S (for Short shield holes)
Page 40 of 141
2. Place the
ASSEMBLY PLATE
the square hole of the
.
SPINDLE
3. Use the Allen key to screw the grub screw into the
, to secure the
INSIDE LEVER HANDLE
4. Put a and a
WASHER NUT
.
SLIT
While doing so, keep the cables upwards, so that
they do not get squeezed!
5. Depending upon whether the Euro Profile cylinder is
assembled or not, the spring clip will be assembled.
a) In case the Euro profile cylinder is assembled, the spring
clip will not be assembled. Put only the
on both of the lower
FIXING SCREWS
on the and press
FIXING SCREWS
on the
INSIDE LEVER HANDLE SQUARE
.
SQUARE SPINDLE
on the
FIXING SCREW WITH WIRING
and
WASHERS
.
Long shield ILS
NUTS