CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 22

4.5 Assembling basic version (for Long shield holes)
Assembly preparation for Long shield ILS basic version
Assembly on the outside of the door
Page 22 of 141
Before assembling the hardware, check for correct
fit of the coupling module; see
module" on page 17
1. If a handle set is already existent in the door,
dismantle it. An existing Euro profile cylinder,
provided it is of appropriate length, can continue to be
used with the Long shield ILS.
If the door does not have a Euro profile cylinder, it is
advisable to assemble it before assembling the Long
shield ILS.
You can now start with the assembly.
1. Push the two
FIXING SCREWS WITHOUT CABLE SLIT
lower and the middle screw placement slot of
.
FITTING
The fixing rings on the head of the screws serve to
fix the screws in the position that matches the
existing holes.
"Check the coupling
in the
OUTSIDE
Long shield ILS