CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 29

Long shield ILS
4.5 Assembling basic version (for Long shield holes)
8. Check whether the handle set is correctly aligned.
9. Tighten the with the wrench (max. 1.2 Nm).
NUTS
While tightening the
the cables upwards, so that these are not jammed!
10. Re-tighten the
GRUBSCREW OF T
FIXING SCREW WITH CABLE SLIT
he i andle.
NSIDE LEVER H
Page 29 of 141
hold