CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 56

4.7 Assembling wide shield (for rosette-holes)
Page 56 of 141
6. Tighten by hand.
NUTS
While tightening the
the cables upwards, so that these are not jammed!
7. Loosen the grub screw from the
slightly to remove any potential mechanical
HANDLE
stress from the spindle.
SQUARE
8. Check whether the handle set is correctly aligned.
9. Tighten the with the wrench (max. 1.2 Nm).
NUTS
Halten Sie während des Festziehens der
B
EFESTIGUNGSSCHRAUBE MIT
Leitungen nach oben, damit diese nicht
eingeklemmt werden!
FIXING SCREW WITH CABLE SLIT
INSIDE LEVER
L die
EITUNGSSCHIENE
Long shield ILS
hold