11.5 Authorising locking media
11.5 Authorising locking media
Required media:
Program-Master
l
Any locking media that needs to be authorised
l
The Program-Master must first be authorised for the locking device on which it is to be
used, see
"Authorising additional master media"
Procedure:
1. Hold the Program-Master for ca 1 second in the reading field of the locking device to start
the "authorise mode.
The following signal appears:
1x short green
2. Now you can authorise any number of locking media one after the other by holding each
locking media for ca 1 second in the reading field of the locking device.
The following signal appears for each locking media:
1x short green
Page 116 of 141
on page 111
Long shield ILS