CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 84

5.8 Opening mode of the locking devices
5.8.2 Simultaneous activation of multiple opening modes
An opening mode remains activated until it is deactivated with the corresponding master media
or until the time set for the time profile has expired. The office mode is activated by the locking
media and deactivated automatically when the block mode, release mode or emergency mode or
a block time profile or enable time profile is activated.
For the opening modes, which were activated by the master media, applies: the activation of a
further opening mode does not deactivate the current mode. Therefore, if hierarchy permits,
different opening modes can also overlap (see
for an opening mode to be activated in addition to an already active opening mode, the new
opening mode must have a higher hierarchical level than the current opening mode.
Example: You put a locking device first in the release mode and than in the block mode -
without deactivating the release mode. Thereupon,the block mode is active. If you now
deactivate the block mode, the locking device returns to the release mode. If you deactivate the
release mode with a Release-Master, the device returns to the normal mode.
5.8.3 Hierarchy of the opening modes
1 = highest priority, 7 = lowest priority
1 Emergency mode (activated by Emergency-Key)
2 Block mode (activated by Block-Master)
3 Block time (activated by time profile in OMEGA Client)
4 Release mode (activated by Release mode)
5 Enable time (activated by time profile in OMEGA Client)
6 Office mode (set in the OMEGA Client, activated by locking media)
7 Normal mode (opened by locking media)
Page 84 of 141
"Hierarchy of the opening modes" below). In order
Long shield ILS