CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 73

2. You initialise an RF stick on your PC so that it can work with the OMEGA Client software
(see "Installing RF-Stick for the OMEGA client"
3. You specify the locking authorisations, time profiles etc. in OMEGA Client. A detailed
manual is available in the OMEGA Suite Help.
4. Proceed to a locking device with a PC and an RF-Stick connected to it.
5. You establish the connection between the locking device and the RF-Stick through an RF
Stick-Master and transmit the generated programming jobs to the locking device (see
"Transmitting programming jobs with an RF-Stick to a locking device"
nection between the locking device and an RF-Stick is automatically disconnected there-
after.
5.4.3 Installing RF-Stick for the OMEGA client
Required administration devices:
RF-Stick
l
PC with OMEGA Client installed
l
Procedure:
1. Insert the RF-Stick into a free USB socket of a PC with OMEGA Client installed on it.
The RF-Stick driver will be installed automatically.
2. Start the OMEGA Client and log in with your user name and password.
The OMEGA Client detects the RF-Stick automatically. "RF-Stick ready" is displayed now on the
lower bar of OMEGA Client.
The RF-Stick is now initialised.
Troubleshooting:
Problem/Signalling
The OMEGA Client dis-
plays "RF-Stick not author-
ised".
5.4.4 Transmitting programming jobs with an RF-Stick to a locking device
Required master media and administration devices:
RF-Stick-Master
l
RF-Stick
l
PC with OMEGA Client installed
l
Long shield ILS
Reason
The RF-Stick belongs to another system
and cannot be use for
the administration of your OMEGA
FLEX system.
5.4 Administration with an RF-Stick
below).
below). The con-
Solution
Use an RF-Stick with system iden-
tification code for your OMEGA FLEX
system.
Page 73 of 141