Online Mode - CEStronics OMEGA FLEX Assembly And Operating Manual

13.8 Online mode

13.8.1 Activating online mode
Online mode can only be activated for NET variant locking devices.
Required:
RF-Ini-Master (does not require prior authorisation to activate online mode)
l
Procedure:
Steps
1. Hold the RF-Ini-Master in the reading field of the locking device for 1 second.
One of the following signals appears:
A: 1x short green
B: 1x long red
C: 1x long green
Online mode is now active, regardless of whether a connection to an Access-Point could be established. As soon as an Access-
Point is found, the locking device automatically connects to it.
Troubleshooting:
Signal
While the RF-Ini-Master is held in the reading field:
1x long red
RFID furniture lock
Connection to Access-Point successful
Cannot connect to Access-Point
Connection to Access-Point already exists
Cause
The locking device is not a NET or VA
variant.
13.8 Online mode
Solution
Online mode is not available for these locking
devices.
Page 75 of 84