CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 30

4.5 Assembling basic version (for Long shield holes)
Page 30 of 141
11. Run the cables through the middle of the
.
MODULE
12. Use the slot-head screwdriver to screw the red cable
onto the positive terminal (+) and the black cable onto
the negative terminal (-).
13. Slide the B
ATTERY MODULE
, until it snaps in.
ASSEMBLY PLATE
- Should the top most
FIXING SCREW
instead of sliding it from top to bottom, you can also
press the battery module into the recess of the
mounting plate from the front.
BATTERY
from top to bottom on the
be in the way, then,
Long shield ILS