Transmitting Programming Jobs Using Rf-Stick To A Locking Device - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

11.18 Transmitting programming jobs using RF-Stick to a locking
device
Required master media and administration devices:
RF-Stick-Master
l
RF-Stick
l
PC with OMEGA Client installed
l
The RF-Stick-Master must first be authorised for all locking devices on which it is to be used
(see "Authorising additional master media"
been authorised once is compatible with every RF-Stick of a OMEGA FLEX system.
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through P
ROGRAMMING
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under "Programming status".
Long shield ILS
11.18 Transmitting programming jobs using RF-Stick to a locking device
on page 111). Each RF-Stick-Master that has
> P .
ROGRAM ALL CHANGES
Page133 of 141