CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 74

5.4 Administration with an RF-Stick
The RF-Stick-Master must first be authorised for all locking devices on which it is to be used
(see "Authorising additional master media"
been authorised once is compatible with every RF-Stick of a OMEGA FLEX system.
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through P
ROGRAMMING
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under "Programming status".
Procedure for transmitting programming jobs via an RF-Stick:
1. Proceed with your PC and the RF-Stick connected to it to the locking device into which the
programming jobs are to be transmitted.
If you want to transmit the programming jobs into multiple locking devices, you can freely
choose the sequence in which you look for the locking devices.
Page 74 of 141
on page 111). Each RF-Stick-Master that has
> P .
ROGRAM ALL CHANGES
Long shield ILS