Using The Office Function - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

6.2 Using the Office function
Signalling
be read (No sig- device.
nal).
The reading field is shielded by metallic
materials.
Shortly before, another authorised locking
media was held in the reading field of
the locking device and the opening
period of the locking device has not yet
expired.
The battery is empty.
b) The locking media is defective.
The locking media is not authorised.
The locking media is authorised but the
block time or block mode is active.
The locking media is authorised and the
locking device is currently in release
mode.

6.2 Using the Office function

In order to use the office function, the administrator must first set it up with the OMEGA
Client software (see
The office function in locking media can put locking devices into office mode. In the office mode,
locking devices are released for a certain period of time, i.e.during this time, the door can be
opened even without the locking media. After expiry of the time period, the locking device reverts
back to normal mode automatically. In V-NET, the office mode is not limited by time, i.e. a locking
device remains coupled until the office mode is deactivated by the locking media again.
Page 86 of 141
Reason
"Office-function" on page 67).
Solution
Remove the metallic materials from the
reading field of the locking device.
You can open the door without having to
have your locking media read.
Replace the batteries (see "Maintenance"
on page 91).
Have a new locking media issued by the
administrator of the OMEGA FLEX system.
Have the locking media authorised by the
administrator of the OMEGA FLEX system.
If the block time or block mode is active, a
locking device cannot be opened by an
authorised locking media.
You can open the door also without an
authorised locking media.
Long shield ILS