CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 35

4.6.2 Assembling Long shield Option S
The reading side of the fitting is assembled on the outside of the door; the non-reading side is
assembled on the inside.
The handle set cannot be assembled on split follower locks!
Tools required:
Tool
ILS spanner
(8 mm)
3 mm
Allen-
key
0.4 mm x
2.0 mm
slot head
screwdriver
CES ring
spanner
"The assembly set is supplied one-off with the first order of a system. You can order
additional tools from your CES partner.
Long shield ILS
Required for
Fixing screws nuts
Grub screws of the inside shield lever handle, in the case of the
outer shield also for countersunk head screws of the outside shield
Screwing the cables
Fixture ring
4.6 Assembly Option S (for Short shield holes)
Part of
the
assembly
set*
Page 35 of 141