CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 39

Assembly on the inside of the door
Long shield ILS
4.6 Assembly Option S (for Short shield holes)
10. Guide the
OUTSIDE FITTING
holes of the door. Push the
lock follower.
While guiding, keep the cables tout so that they lie
correctly in the cable slit. The cables must not get
squeezed or jammed!
11. Align the Euro profile cylinder, if it does not sit
correctly in the outside fitting.
The outside fitting is now temporarily fixed, so that you
can continue with assembly of the inside fitting.
Depending on the size of the lock follower, you may
possibly need adaptor sleeve for the square spindle
(see "Adaptor sleeves for square spindle"
page 18). Use adapter sleeves in this case.
1. Run the cables through the elongated hole of the
, that is located below
ASSEMBLY PLATE
handle.
through the Long shield
through the
SQUARE SPINDLE
on
inside lever
THE
Page 39 of 141