4.7 Assembling wide shield (for rosette-holes)
4.7.2 Parts name Long shield ILS wide shield
1
Counter sunk screw
2
Rosette holes
3
Assembly plate of the outside fitting
4
Outside shield of the outside fitting
5
Coupling follower
4.7.3 Assembling Long shield ILS wide shield on rosette holes
The reading side of the fitting is assembled on the outside of the door; the non-reading side is
assembled on the inside.
The wide shield versions of the Long shield ILS can also be assembled on Long shield or Short
shield (option S) holes. In this case, please follow the manual
shield holes)"
on page 20 or
The manual describes the assembly on rosette holes taking the basic version of the Long
shield ILS as an example. The Long shield ILS assembly follows the same procedure.
The handle set cannot be assembled on split follower locks!
Page 48 of 141
"Assembly Option S (for Short shield holes)"
"Assembling basic version (for Long
on page 34.
Long shield ILS