11.10 Deactivating release mode
Required master media:
Release-Master
l
The Program-Master must first be authorised for the locking device on which it is to be
used, see
"Authorising additional master media"
Procedure:
1. Hold the Release-Master before the reading field of the locking device.
After ca. 2 second, the following signal appears:
2x short green
The release mode is now deactivated. To gain access, authorised locking media must now again be
held before the locking device.
Troubleshooting:
Signalling
A higher-priority opening mode is cur-
rently active (see
ing modes"
on page 84).
The Release-Master is not authorised.
Long shield ILS
Reason
Deactivate the
"Hierarchy of the open-
opening mode with higher priority.
Authorise the
Release-Master
11.10 Deactivating release mode
on page 111
Solution
Page123 of 141