CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 53

Long shield ILS
4.7 Assembling wide shield (for rosette-holes)
10. Run the cables with the help of the
through the corresponding screw hole in the door.
- Turn the installation tube to and fro slightly while feeding
it in, so that it moves forwards more easily.
11. Pull the
INSTALLATION TUBE
door.
12. Guide the
OUTSIDE FITTING
through the rosette holes of the door and both
SCREWS
the lower fixing screws through the PZ holes. Push
the through the lock follower.
SQUARE SPINDLE
While guiding, keep the cables tout so that they lie
correctly in the cable slit. The cables must not get
squeezed or jammed!
13. Align the Euro profile cylinder, if it does not sit
correctly in the outside fitting.
INSTALLATION TUBE
on the opposite side of the
with both of the top
FIXING
Page 53 of 141