Adaptor Sleeves For Square Spindle - CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual

4.3 Adaptor sleeves for square spindle

4.3 Adaptor sleeves for square spindle

The size of the supplied square spindle depends on the size of the lock follower. You need to use
an adaptor sleeve for certain square spindle sizes.
Overview of adaptor sleeves
Square Required adaptor sleeve
spindle size
7 mm Special square spindle (7 mm square, reinforced to 8 mm on
one side, for 8 mm coupling follower)
Adaptor sleeve from 7 mm to 9 mm on the insider lever
handle side
8 mm Adaptor sleeve from 8 mm to 9 mm on the inside lever
handle side
9 mm -
10 mm Special square spindle (each 9 mm outside, centre reinforced
to 10 mm)
No adaptor sleeve required
Position of the adaptor sleeves
Page 18 of 141 Long shield ILS