4.6 Assembly Option S (for Short shield holes)
Page 44 of 141
15. Insert the batteries with the correct polarity (see
Figure).
Use only the Energizer Ultimate Lithium 1,5V AA
batteries.
Notes on the meaning of signalling after battery
insertion can be found in the section
"Maintenance"
on page 91.
16. If the
protruding, twist and push these
CABLES ARE
between the batteries to prevent jamming.
17. Use a master media or locking media to check at the
, whether the handle set reads the
OUTSIDE FITTING
media.
Long shield ILS