CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 50

4.7 Assembling wide shield (for rosette-holes)
Assembly preparation - Long shield ILS on rosette holes.
Assembly on the outside of the door
Page 50 of 141
Before assembling the hardware, check for correct
fit of the coupling module; see
module" on page 17
1. In case a (rosette) handle set is already existent in the
door, disassemble it. An existing Euro profile cylinder,
provided it is of appropriate length, can continue to be
used with the Long shield ILS.
If the door does not have a Euro profile cylinder, it is
advisable to assemble it before assembling the Long
shield ILS.
You can now start with the assembly.
1. Unscrew the counter sunk screws of
with the Allen key and raise the
outside shield.
2. Run the cables through the right rosette hole of
ASSEMBLY PLATE OF THE OUTSIDE SHIELD
"Check the coupling
OUTSIDE SHIELD
of the
ASSEMBLY PLATE
.
Long shield ILS