CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 55

Long shield ILS
4.7 Assembling wide shield (for rosette-holes)
3. Use the Allen key to screw the grub screw into the
, to secure the
INSIDE LEVER HANDLE
4. Put the on both of the upper
NUTS
While doing so, keep the cables upwards, so that
they do not get pinched or jammed!
5. Depending upon whether the Euro Profile cylinder is
assembled or not, the spring clip will be assembled.
a) In case the Euro profile cylinder is assembled, the spring
clip will not be assembled. Put only the
on both of the lower
FIXING SCREWS
b) In case no Euro profile cylinder is assembled, then the
spring clip will be assembled. Put the
and on both of the lower
NUTS
.
SQUARE SPINDLE
.
FIXING SCREWS
and
WASHERS NUTS
.
,
SPRING CLIPS WASHERS
.
FIXING SCREWS
Page 55 of 141