CEStronics CES OMEGA FLEX Assembly And Operating Instructions Manual page 54

4.7 Assembling wide shield (for rosette-holes)
Assembly on the inside of the door
Page 54 of 141
The outside fitting is now temporarily fixed, so that you
can continue with assembly of the inside fitting.
Depending on the size of the lock follower, you may
possibly need adaptor sleeve for the square spindle
(see "Adaptor sleeves for square spindle"
page 18). Use adapter sleeves in this case.
1. Run the cables through the right rosette hole of
ASSEMBLY PLATE OF THE INSIDE FITTING
2. Place the
ASSEMBLY PLATE
the square hole of the
.
SPINDLE
on
.
on the and press
FIXING SCREWS
on the
INSIDE LEVER HANDLE SQUARE
Long shield ILS